NSN 5305-01-054-6239
High Torque Screw
2.132 inches fastener length, between 0.3735 inches and 0.3745 inches grip diameter, offset cruciform (torque set) internal drive style, thread diameter: 0.375 inches.
Manufacturer part number AIC9535-6-25 for national stock number 5305010546239.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6239.
-
MPN or Model
AIC9535-6-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.555 inches and 0.585 inches -
Fastener Length
2.132 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2594 MPN HST12AZ5-7Materi Aircraft Pin
- 5305-00-235-0312 MPN NAS1101E02-3Machine Screw
- 5305-00-310-6063 MPN AIC813-06R6Machine Screw
- 5305-01-033-9057 MPN BACB30EF8-6Socket Head Cap Screw
- 5305-01-158-5367 MPN AIC940-5-8Machine Screw
- 5305-01-243-9351 MPN SM-C-800983-46Socket Head Cap Screw
- 5305-01-259-7002 MPN AIC984-3-4RClose Tolerance Screw
- 5305-01-282-2168 MPN 653438-2Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6239 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC9535-6-25 | Sps Technologies, Llc |
121754-6-25 | Sps Technologies, Llc |
VT1696-6-25 | Arconic Global Fasteners & Rings, |
PBF1198-6-25 | Sps Technologies, Llc |
121754-6-25 | Sps Technologies, Llc |
C9535-6-25 | Lockheed Martin Corporation |
VT1696-6-25 | Alcoa Global Fasteners, Inc. |