NSN 5305-01-054-6251
High Torque Screw
Conical bearing surface of head 99.0 degree to 101.0 degree included angle 0.077 in. Long.
Manufacturer part number VT1696-7-39 for national stock number 5305010546251.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6251.
-
MPN or Model
VT1696-7-39
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
3.121 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.605 inches and 0.625 inches -
Head Height
Between 0.112 inches and 0.125 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 2.428 inches and 2.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-486-2578 MPN AIC1023H10-13Close Tolerance Screw
- 5305-00-487-5081 MPN AIC793-4-10Close Tolerance Screw
- 5305-00-505-2718 MPN LS15262V04-12Machine Screw
- 5305-00-929-1621 MPN 51B222-23Machine Screw
- 5305-01-054-6238 MPN C9535-6-23Close Tolerance Screw
- 5305-01-243-9351 MPN SM-C-800983-46Socket Head Cap Screw
- 5305-01-304-2489 MPN AIC1147-4-9PClose Tolerance Screw
- 5305-01-365-1199 MPN BACB30NN6K44Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6251 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1696-7-39 | Alcoa Global Fasteners, Inc. |
121754-7-39 | Sps Technologies, Llc |
SC1776-7-39 | Arconic Global Fasteners & Rings, |
FBF1198-7-39 | Sps Technologies, Llc |
PBF1198-7-39 | Sps Technologies, Llc |
121754-7-39 | Sps Technologies, Llc |
C9535-7-39 | Lockheed Martin Corporation |
AIC9535-7-39 | Sps Technologies, Llc |