NSN 5305-01-054-6254
High Torque Screw
1.183 inches fastener length, between 0.4360 inches and 0.4370 inches grip diameter, hexagon internal drive style, thread diameter: 0.438 inches.
Manufacturer part number 121754-7-8 for national stock number 5305010546254.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6254.
-
MPN or Model
121754-7-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
1.183 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Hexagon -
End Application
Aircraft, f-16 -
Thread Diameter
0.438 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-3406 MPN LS15264V04-11Machine Screw
- 5305-00-823-5806 MPN NAS1102-04-8Machine Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-015-3313 MPN NAS1101-3-40Machine Screw
- 5305-01-025-6408 MPN AIC812-02-7Machine Screw
- 5305-01-054-4624 MPN AIC9535-7-21Close Tolerance Screw
- 5305-01-055-3803 MPN C9535-1-17Close Tolerance Screw
- 5305-01-119-7188 MPN BACB30LU4-24Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6254 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-7-8 | Sps Technologies, Llc |
AIC9535-7-8 | Sps Technologies, Llc |
SC1776-7-8 | Arconic Global Fasteners & Rings, |
PBF1198-7-8 | Sps Technologies, Llc |
C9535-7-8 | Lockheed Martin Corporation |
VT1696-7-8 | Alcoa Global Fasteners, Inc. |
SF120-7-8 | Saturn Fasteners Inc |
C9535-7-8 | Pilgrim Screw Corporation |
121754-7-8 | Sps Technologies, Llc |