NSN 5305-01-054-6255
High Torque Screw
Conical bearing surface of head 99.0 degree to 101.0 degree included angle 0.077 in. Long.
Manufacturer part number C9535-7-9 for national stock number 5305010546255.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6255.
-
MPN or Model
C9535-7-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
1.255 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.605 inches and 0.625 inches -
Head Height
Between 0.112 inches and 0.125 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-021-0433 MPN AIC82-3-26Close Tolerance Screw
- 5305-00-354-4584 MPN HT4024L3-8Close Tolerance Screw
- 5305-00-816-2625 MPN 51B222-8HMachine Screw
- 5305-00-840-5962 MPN 965336-1Externally Relieved Body Screw
- 5305-01-054-4636 MPN BACB30LK3-4Close Tolerance Screw
- 5305-01-085-6757 MPN AIC811-06-15Socket Head Cap Screw
- 5305-01-135-4125 MPN SC2671-4-11Machine Screw
- 5305-01-150-8725 MPN AIC811-02-2Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6255 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C9535-7-9 | Sps Technologies, Llc |
C9535-7-9 | Arconic Global Fasteners & Rings, |
C9535-7-9 | Sps Technologies, Llc |
C9535-7-9 | Sps Technologies, Llc |
SC1776-7-9 | Arconic Global Fasteners & Rings, |
121754-7-9 | Sps Technologies, Llc |
121754-7-9 | Sps Technologies, Llc |
AIC9535-7-9 | Sps Technologies, Llc |
9535-7-9 | Sps Technologies, Llc |
9535-7-9 | Sps Technologies, Llc |
C9535-7-9 | Alcoa Global Fasteners, Inc. |
PBF1198-7-9 | Sps Technologies, Llc |
C9535-7-9 | Lockheed Martin Corporation |
VT1696-7-9 | Alcoa Global Fasteners, Inc. |
C9535-7-9 | M.s. Aerospace Inc. |