NSN 5305-01-054-6259
High Torque Screw
Between 1.160 inches and 1.190 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC985-3-13 for national stock number 5305010546259.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6259.
-
MPN or Model
AIC985-3-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.160 inches and 1.190 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-463-6364 MPN A1102S08-8Machine Screw
- 5305-00-822-7811 MPN NAS1101E6-20Machine Screw
- 5305-00-880-9448 MPN AIC83-3-3Close Tolerance Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-119-1408 MPN AIC984-7-15Close Tolerance Screw
- 5305-01-214-7896 MPN BACB30LU9-20Close Tolerance Screw
- 5305-01-412-1937 MPN TX1026D3-3AFClose Tolerance Screw
- 5305-01-417-2491 MPN TX1026V-4-19Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6259 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985-3-13 | Sps Technologies, Llc |
PBF1166-3-13 | Sps Technologies, Llc |
121558-3-A13P | Sps Technologies, Llc |
VT1694F3-13 | Alcoa Global Fasteners, Inc. |
VT1694F3-13 | Arconic Global Fasteners & Rings, |
SF-117-3-13 | Saturn Fasteners Inc |
121558-3-A13P | Sps Technologies, Llc |
C7985-3-13 | Lockheed Martin Corporation |
AIC985-3-13P | Sps Technologies, Llc |