NSN 5305-01-054-6261
High Torque Screw
Between 0.723 inches and 0.753 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number C7985-3-6 for national stock number 5305010546261.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6261.
-
MPN or Model
C7985-3-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.723 inches and 0.753 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-316-7348 MPN AIC813-02R6Machine Screw
- 5305-00-915-2211 MPN NAS1101-04-7Machine Screw
- 5305-01-012-2012 MPN A1C812-04-12Machine Screw
- 5305-01-045-3016 MPN ST3M506-3-10-1Socket Head Cap Screw
- 5305-01-054-4632 MPN BACB30773-3Close Tolerance Screw
- 5305-01-054-6259 MPN AIC985-3-13PClose Tolerance Screw
- 5305-01-055-3808 MPN BACB30LU3-23Close Tolerance Screw
- 5305-01-090-6334 MPN BACB30LR4-17Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6261 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7985-3-6 | Sps Technologies, Llc |
C7985-3-6 | Arconic Global Fasteners & Rings, |
C7985-3-6 | Huck International, Inc. |
H185-3-6 | Huck International, Inc. |
C7985-3-6 | Sps Technologies, Llc |
C7985-3-6 | Sps Technologies, Llc |
C7985-3-6 | Sps Technologies, Llc |
AIC985-3-6 | Sps Technologies, Llc |
PBF1166-3-6 | Sps Technologies, Llc |
121558-3-A6P | Sps Technologies, Llc |
VT1694F3-6 | Alcoa Global Fasteners, Inc. |
C7985-3-6 | Lockheed Martin Corporation |
AIC985-3-6P | Sps Technologies, Llc |