NSN 5305-01-054-6262
High Torque Screw
Between 0.786 inches and 0.816 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number PBF1166-3-7 for national stock number 5305010546262.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6262.
-
MPN or Model
PBF1166-3-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.786 inches and 0.816 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-025-4069 MPN 51B600C06-14BMachine Screw
- 5305-00-172-6301 MPN NAS1101-6-20Machine Screw
- 5305-01-038-9556 MPN BACB30LH3-4Close Tolerance Screw
- 5305-01-284-2993 MPN AIC4038-4-3Machine Screw
- 5305-01-287-1920 MPN AIC984BL4-11Close Tolerance Screw
- 5305-01-310-9248 MPN AIC986-6-7Close Tolerance Screw
- 5305-01-319-2122 MPN AIC1652-4-10Close Tolerance Screw
- 5305-01-319-6514 MPN 1498M37P01Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6262 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1166-3-7 | Sps Technologies, Llc |
121558-3-A7P | Sps Technologies, Llc |
VT1694F3-7 | Alcoa Global Fasteners, Inc. |
AIC985-3-7 | Sps Technologies, Llc |
C7985-3-7 | Lockheed Martin Corporation |
AIC985-3-7P | Sps Technologies, Llc |