NSN 5305-01-054-6280
High Torque Screw
Between 1.017 inches and 1.047 inches fastener length, flat countersunk head style, between 0.515 inches and 0.566 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number AIC618-6-7 for national stock number 5305010546280.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6280.
-
MPN or Model
AIC618-6-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 1.017 inches and 1.047 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.515 inches and 0.566 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-073-1950 MPN AIC811-4-6Socket Head Cap Screw
- 5305-00-821-7031 MPN NAS1102-02-20Machine Screw
- 5305-00-969-4754 MPN AIC1351-010Socket Head Cap Screw
- 5305-01-092-0202 MPN NAS1101-3-68Machine Screw
- 5305-01-158-5371 MPN 3M893-3-9Machine Screw
- 5305-01-254-2565 MPN 3M963-4L8Close Tolerance Screw
- 5305-01-303-6353 MPN AIC939-3-8Close Tolerance Screw
- 5305-01-381-5755 MPN AIC1652-5-45Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6280 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-6-7 | Sps Technologies, Llc |
GS1009-6-7 | B & B Specialties Inc. |
C20645-6-7 | Lockheed Martin Corporation |
93926-6-7 | Sps Technologies, Llc |
PBF1166-6-7 | Sps Technologies, Llc |
C7985-6-7 | Lockheed Martin Corporation |
VT1694F6-7 | Alcoa Global Fasteners, Inc. |
121558-6-A7P | Sps Technologies, Llc |