NSN 5305-01-054-6281
High Torque Screw
Between 0.808 inches and 0.838 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number H044-3-8 for national stock number 5305010546281.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6281.
-
MPN or Model
H044-3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.808 inches and 0.838 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-082-1897 MPN 3MFR509-10R9Machine Screw
- 5305-00-310-6181 MPN AIC812-08-8Machine Screw
- 5305-00-505-3196 MPN LS15264V3-14Machine Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-045-2467 MPN 51B223-54Close Tolerance Screw
- 5305-01-275-0515 MPN AIC985-4-D7Close Tolerance Screw
- 5305-01-397-8808 MPN 93926-4-17Close Tolerance Screw
- 5305-01-417-2491 MPN TX1026V4-19AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6281 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H044-3-8 | Huck International, Inc. |
VT1693F3-8 | Alcoa Global Fasteners, Inc. |
AIC984-3-8 | Sps Technologies, Llc |
VT1693F3-8 | Arconic Global Fasteners & Rings, |
PBF1165-3-8 | Sps Technologies, Llc |
121557-3-A8P | Sps Technologies, Llc |
C7984-3-8 | Lockheed Martin Corporation |
121557-3-A8P | Sps Technologies, Llc |
H044-3-8 | Huck Intl Inc |
12155-3-A8P | Sps Technologies, Llc |
AIC984-3-8P | Sps Technologies, Llc |