NSN 5305-01-054-6283
High Torque Screw
Between 1.582 inches and 1.612 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number AIC986-6-15 for national stock number 5305010546283.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6283.
-
MPN or Model
AIC986-6-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.644 inches and 0.674 inches -
Fastener Length
Between 1.582 inches and 1.612 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.375 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-00-959-0155 MPN NAS1101-4-18Machine Screw
- 5305-01-101-6018 MPN AIC812-06-21Machine Screw
- 5305-01-158-5370 MPN AI940-3-6Machine Screw
- 5305-01-218-5774 MPN AIC4043-06-12Machine Screw
- 5305-01-348-7101 MPN 03A225-4-10Close Tolerance Screw
- 5305-01-451-3466 MPN C7985-D8RShoulder Screw
- 5305-01-512-8373 MPN 3M1170C5-16AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6283 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC986-6-15 | Sps Technologies, Llc |
121711-6-15 | Sps Technologies, Llc |
VT1695-6-15 | Alcoa Global Fasteners, Inc. |
H186-6-15 | Huck International, Inc. |
VT1695-6-15 | Arconic Global Fasteners & Rings, |
C7986-6-15 | Sps Technologies, Llc |
PBF1196-6-15 | Sps Technologies, Llc |
C7986-6-15 | Lockheed Martin Corporation |