NSN 5305-01-054-6288
High Torque Screw
Between 0.933 inches and 0.963 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number PBF1165-3-10 for national stock number 5305010546288.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6288.
-
MPN or Model
PBF1165-3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.933 inches and 0.963 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-082-1897 MPN 3MFR509-10R9Machine Screw
- 5305-00-826-9971 MPN SK2015-703Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-076-6318 MPN 51B581-5-22HClose Tolerance Screw
- 5305-01-102-0313 MPN HT4069-5-17AClose Tolerance Screw
- 5305-01-350-2247 MPN AIC1658-4-6Close Tolerance Screw
- 5305-01-415-3745 MPN AIC4414-06-9Machine Screw
- 5305-01-417-2490 MPN 3M1169V-3-14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6288 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1165-3-10 | Sps Technologies, Llc |
121557-3-A10P | Sps Technologies, Llc |
VT1693F3-10 | Alcoa Global Fasteners, Inc. |
C7984-3-10 | Sps Technologies, Llc |
C7984-3-10 | Lockheed Martin Corporation |
AIC984-3-10 | Sps Technologies, Llc |
AIC984-3-10P | Sps Technologies, Llc |
VT1693F3-10 | Arconic Global Fasteners & Rings, |