NSN 5305-01-055-1147
High Torque Screw
Between 1.375 inches and 1.405 inches fastener length, flat countersunk head style, between 0.691 inches and 0.765 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number BACB30LU6-13 for national stock number 5305010551147.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-055-1147.
-
MPN or Model
BACB30LU6-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 1.375 inches and 1.405 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.691 inches and 0.765 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-519-8247 MPN BACS12ER3K20Machine Screw
- 5305-01-632-4003 MPN BACS12CK08U5Machine Screw
- 5306-00-538-7605 MPN BACB30NE4-10Shear Bolt
- 5306-01-045-9522 MPN VAL3033-5XYShoulder Bolt
- 5306-01-142-3545 MPN VAL23608-4D94Shoulder Bolt
- 5306-01-191-6280 MPN VFK600-10H28Shear Bolt
- 5306-01-299-7605 MPN STSBG003A06U018Shear Bolt
- 5306-01-327-9041 MPN VCG0002-7H60Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-055-1147 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU6-13 | The Boeing Company |
BACB30LU6-13 | Sps Technologies, Llc |
BACB30LU6-13 | Valley-todeco, Inc. |
BACB30LU6-13 | Arconic Global Fasteners & Rings, |
BACB30LU6-13 | Sps Technologies, Llc |
BACB30LU6-13 | Sps Technologies, Llc |
BACB30LU6-13 | Sonic Industries Inc. |
BACB30LU6-13 | Alcoa Global Fasteners, Inc. |