NSN 5305-01-055-1149
High Torque Screw
Between 0.560 inches and 0.590 inches fastener length, flat countersunk head style, between 0.190 inches and 0.225 inches head diameter, grip diameter: between 0.1105 inches and 0.1115 inches .
Manufacturer part number BACB30LU04-5 for national stock number 5305010551149.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-055-1149.
-
MPN or Model
BACB30LU04-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.238 inches and 0.288 inches -
Fastener Length
Between 0.560 inches and 0.590 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.190 inches and 0.225 inches -
Grip Diameter
Between 0.1105 inches and 0.1115 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
40 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-283-7458 MPN BM33024V5-8UClose Tolerance Screw
- 5305-00-316-7351 MPN E125-156Machine Screw
- 5305-01-015-6642 MPN S5008-4-4Close Tolerance Screw
- 5305-01-054-2530 MPN BACB30LU4-9Close Tolerance Screw
- 5305-01-064-5446 MPN NAS1190E08P10BMachine Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-078-2929 MPN HT4020-3-11Close Tolerance Screw
- 5305-01-141-7197 MPN HT4020-5-21AYShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-055-1149 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU04-5 | The Boeing Company |
BACB30LU04-5 | Huck International, Inc. |
BACB30LU04-5 | Huck Intl Inc |