NSN 5305-01-055-3804
High Torque Screw
1.419 inches fastener length, fillister countersunk head style, between 0.690 inches and 0.710 inches head diameter, head height: between 0.130 inches and 0.143 inches .
Manufacturer part number AIC9535-8-10 for national stock number 5305010553804.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-055-3804.
-
MPN or Model
AIC9535-8-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.779 inches and 0.809 inches -
Fastener Length
1.419 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.690 inches and 0.710 inches -
Head Height
Between 0.130 inches and 0.143 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-6063 MPN AIC813-06R6Machine Screw
- 5305-01-004-6893 MPN 51B600C06-12BMachine Screw
- 5305-01-076-4881 MPN NAS1101-06-10Machine Screw
- 5305-01-123-8456 MPN AIC812-08-9Machine Screw
- 5305-01-328-9227 MPN AIC1700-3-5Close Tolerance Screw
- 5305-01-351-5403 MPN AIC812-01-7Machine Screw
- 5305-01-406-7906 MPN AIC984-4-10RClose Tolerance Screw
- 5305-01-462-2732 MPN TX1004V4-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-055-3804 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC9535-8-10 | Sps Technologies, Llc |
121754-8-10 | Sps Technologies, Llc |
VT1696-8-10 | Alcoa Global Fasteners, Inc. |
VT1696-8-10 | Arconic Global Fasteners & Rings, |
PBF1198-8-10 | Sps Technologies, Llc |
121754-8-10 | Sps Technologies, Llc |
SF120-8-10 | Saturn Fasteners Inc |
C9535-8-10 | Lockheed Martin Corporation |