NSN 5305-01-055-3810
High Torque Screw
Between 2.160 inches and 2.190 inches fastener length, flat countersunk head style, between 0.455 inches and 0.510 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number BACB30LR4-28 for national stock number 5305010553810.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-055-3810.
-
MPN or Model
BACB30LR4-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 2.160 inches and 2.190 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.455 inches and 0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-004-9528 MPN ST3M557-3-3Close Tolerance Screw
- 5305-01-435-3878 MPN BACB30LU7-39Close Tolerance Screw
- 5305-01-477-5622 MPN ST3M652C5-8AClose Tolerance Screw
- 5306-00-926-5554 MPN 3M33-7-15Close Tolerance Bolt
- 5306-01-045-2430 MPN VAL23608-4-36Shoulder Bolt
- 5306-01-067-8530 MPN VAL23033-4H44Shear Bolt
- 5306-01-178-0186 MPN 9514M85P01Shoulder Bolt
- 5306-01-206-7169 MPN J643P03AMachine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-055-3810 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LR4-28 | The Boeing Company |
BACB30LR4-28 | Huck International, Inc. |
BACB30LR4-28 | Sps Technologies, Llc |
BACB30LR4-28 | Valley-todeco, Inc. |
BACB30LR4-28 | Arconic Global Fasteners & Rings, |
BACB30LR4-28 | Federal Manufacturing Corporation |
BACB30LR4-28 | Arconic Global Fasteners & Rings, |
BACB30LR4-28 | Sps Technologies, Llc |
BACB30LR4-28 | Sps Technologies, Llc |
BACB30LR4-28 | Huck Intl Inc |