NSN 5305-01-055-3812
High Torque Screw
Between 1.874 inches and 1.904 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS2806-21 for national stock number 5305010553812.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-055-3812.
-
MPN or Model
NAS2806-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.552 inches and 0.602 inches -
Fastener Length
Between 1.874 inches and 1.904 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard all treatment responses -
Thread Series Designator
Unf -
Specification Data
80205-nas2806 professional/industrial association standard
More from these suppliers
- 5935-00-430-6550 MPN M81511-18-22Electrical Connector Cover
- 5935-00-687-0853 MPN NAS714-11Electrical Receptacle Connector
- 5305-00-004-3129 MPN NAS1190C04P15LSocket Head Cap Screw
- 5305-00-051-0827 MPN MS90725-164Hexagon Head Cap Screw
- 5305-00-059-3660 MPN NASM51958Machine Screw
- 5305-00-067-3863 MPN NAS1189-3P7LSocket Head Cap Screw
- 5305-00-074-4516 MPN NAS1204-38Close Tolerance Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-055-3812 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2806-21 | National Aerospace Standards |