NSN 5305-01-055-8809
High Torque Screw
Between 1.204 inches and 1.234 inches fastener length, flat countersunk head style, between 0.574 inches and 0.637 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number BACB30LU5-12 for national stock number 5305010558809.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-055-8809.
-
MPN or Model
BACB30LU5-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.204 inches and 1.234 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.574 inches and 0.637 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-159-4487 MPN SC2671-4-14Machine Screw
- 5305-01-512-8306 MPN 3M1170C4-5AFClose Tolerance Screw
- 5306-00-612-2929 MPN 6-50417-2Internal Wrenching Bolt
- 5306-00-990-5233 MPN MS21250-07012Shear Bolt
- 5306-01-067-8530 MPN VAL23033-4H44Shear Bolt
- 5306-01-089-5983 MPN 3032T60P02Machine Bolt
- 5306-01-133-4846 MPN VEP220121-4V11Shear Bolt
- 5306-01-148-3680 MPN VCG0009-4-14Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-055-8809 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU5-12 | Federal Manufacturing Corporation |
BACB30LU5-12 | Valley-todeco, Inc. |
BACB30LU5-12 | Sps Technologies, Llc |
BACB30LU5-12 | Arconic Global Fasteners & Rings, |
BACB30LU5-12 | Sps Technologies, Llc |
BACB30LU5-12 | The Boeing Company |
BACB30LU5-12 | Arconic Global Fasteners & Rings, |
BACB30LU5-12 | Sps Technologies, Llc |
BACB30LU5-12 | Huck Intl Inc |
BACB30LU5-12 | Sonic Industries Inc. |
BACB30LU5-12 | Sps Technologies, Llc |
BACB30LU5-12 | Alcoa Global Fasteners, Inc. |
BACB30LU5-12 | Huck International, Inc. |