NSN 5305-01-056-0168
High Torque Screw
Between 2.128 inches and 2.158 inches fastener length, flat countersunk head style, between 0.951 inches and 1.014 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number NAS1580A8T22 for national stock number 5305010560168.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-056-0168.
-
MPN or Model
NAS1580A8T22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.743 inches and 0.793 inches -
Fastener Length
Between 2.128 inches and 2.158 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.951 inches and 1.014 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5305-00-057-0498 MPN MS51958-2Machine Screw
- 5305-00-059-4579 MPN NAS1133-6Close Tolerance Screw
- 5305-00-068-0501 MPN MS90725-5Hexagon Head Cap Screw
- 5305-00-082-6667 MPN NAS1352C06-12Socket Head Cap Screw
- 5305-00-161-1603 MPN NAS1173-9Close Tolerance Screw
- 5305-00-225-9443 MPN MS16996-32Socket Head Cap Screw
- 5305-00-253-5628 MPN MS21318-52Drive Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-056-0168 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A8T22 | National Aerospace Standards |