NSN 5305-01-056-0169
High Torque Screw
Between 0.534 inches and 0.564 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580A3T3 for national stock number 5305010560169.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-056-0169.
-
MPN or Model
NAS1580A3T3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.337 inches and 0.387 inches -
Fastener Length
Between 0.534 inches and 0.564 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-354-9982 MPN NAS1063A12-1000Terminal Board Marker Strip
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5305-00-057-0526 MPN NASM51958Machine Screw
- 5305-00-078-3661 MPN MS35199-32Machine Screw
- 5305-00-083-4614 MPN NAS1581C3H5PClose Tolerance Screw
- 5305-00-165-1874 MPN NAS1101-06H4Machine Screw
- 5305-00-253-5618 MPN MS21318-27Drive Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-056-0169 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3T3 | National Aerospace Standards |
10114922 | Nimikkeistokeskus Ncb Finland |