NSN 5305-01-056-0172
High Torque Screw
Between 2.999 inches and 3.046 inches fastener length, flat countersunk head style, between 1.262 inches and 1.272 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number NAS340CPA27 for national stock number 5305010560172.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-056-0172.
-
MPN or Model
NAS340CPA27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.927 inches and 0.994 inches -
Fastener Length
Between 2.999 inches and 3.046 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.262 inches and 1.272 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.625 inches -
Grip Length
Between 2.052 inches and 2.072 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas340 professional/industrial association standard
More from these suppliers
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-008-7855 MPN NAS1100C04-22PMachine Screw
- 5305-00-052-6923 MPN MS24629-59Tapping Screw
- 5305-00-059-9564 MPN NAS1221-4-12Machine Screw
- 5305-00-102-4553 MPN MS27039-6-17Machine Screw
- 5305-00-105-9425 MPN NAS1635-08LE6Socket Head Cap Screw
- 5305-00-271-7698 MPN NAS229-38Machine Screw
- 5305-00-282-0114 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-056-0172 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS340CPA27 | National Aerospace Standards |