NSN 5305-01-056-1514
High Torque Screw
Between 3.595 inches and 3.625 inches fastener length, flat countersunk head style, between 0.927 inches and 1.019 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number BACB30LU8D46 for national stock number 5305010561514.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-056-1514.
-
MPN or Model
BACB30LU8D46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.710 inches and 0.760 inches -
Fastener Length
Between 3.595 inches and 3.625 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.927 inches and 1.019 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Grip Length
Between 2.865 inches and 2.885 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.394 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-073-4186 MPN 107C2514-4Bellcrank Assembly
- 1560-00-076-2493 MPN 65-33326-1Aircraft Structural Component Support
- 5975-00-288-5877 MPN 27-10386-3Flexible Nonmetallic Conduit
- 1560-00-339-7283 MPN 60-2099-1Aircraft Structural Plate
- 5945-00-450-9391 MPN 27A10429-101-11Electromagnetic Relay
- 5985-00-553-3992 MPN 10-3158Waveguide Assembly
- 1560-00-560-4017 MPN 9-65882-3Elevator Flap Hinge
- 1560-00-607-8942 MPN 34-1193-3Aircraft Access Door
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-056-1514 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU8D46 | The Boeing Company |