NSN 5305-01-056-3199
High Torque Screw
Between 1.199 inches and 1.229 inches fastener length, flat countersunk head style, 0.280 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1152E15P for national stock number 5305010563199.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-056-3199.
-
MPN or Model
NAS1152E15P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 1.199 inches and 1.229 inches -
Head Style
Flat countersunk -
Head Diameter
0.280 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-054-0000 MPN NAS1352C08H8Socket Head Cap Screw
- 5305-00-059-2488 MPN MS51976-44Setscrew
- 5305-00-146-5761 MPN AN565FC8H16Setscrew
- 5305-00-150-3475 MPN MS35206-325Machine Screw
- 5305-00-269-2801 MPN MS90726-58Hexagon Head Cap Screw
- 5305-00-406-8031 MPN NAS1351-4LB24PSocket Head Cap Screw
- 5305-00-455-7446 MPN MS24693-C320Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-056-3199 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1152E15P | National Aerospace Standards |