NSN 5305-01-056-8744
Panel Screw
Between 0.281 inches and 0.312 inches fastener length, fillister head style, between 0.306 inches and 0.322 inches head diameter, head height: between 0.105 inches and 0.115 inches .
Manufacturer part number 975705-1 for national stock number 5305010568744.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-056-8744.
-
MPN or Model
975705-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.198 inches -
Fastener Length
Between 0.281 inches and 0.312 inches -
Head Style
Fillister -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
First Diameter From Head
Between 0.071 inches and 0.074 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.100 inches -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Material
Steel -
Material Specification
66 300 series federal standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 type 2 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-172-4820 MPN G227856-1Electrical Receptacle Connector Body
- 5950-00-244-5469 MPN S92-5156ISSUE3Power Transformer
- 5950-00-244-5538 MPN 92-5212Power Transformer
- 5905-00-449-7919 MPN 280MR188P099Inductive Wire Wound Fixed Resistor
- 5905-00-482-5152 MPN 280MR033P109Film Fixed Resistor
- 5985-00-484-0882 MPN 480103-1Directional Coupler
- 5950-00-570-9300 MPN 375-6007G3Radio Frequency Coil
- 5935-00-583-8498 MPN 276M0027P001Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-056-8744 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
975705-1 | Raytheon Company |
975705-1 | Raytheon Company |
975705-1 | Raytheon Company |