NSN 5305-01-057-3062
High Torque Screw
Between 2.172 inches and 2.204 inches fastener length, flat countersunk head style, between 1.162 inches and 1.281 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number BACB30ABP10-31A for national stock number 5305010573062.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-057-3062.
-
MPN or Model
BACB30ABP10-31A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.600 inches and 0.652 inches -
Fastener Length
Between 2.172 inches and 2.204 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.162 inches and 1.281 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.625 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30ab manufacturers standard
More from these suppliers
- 5940-00-204-8990 MPN BACT12AC11Lug Terminal
- 1560-00-436-0307 MPN 65-3009-14Siderail Trim Assy
- 1560-00-605-4706 MPN 50-4645-4Overhead Duct Assembly
- 1560-00-650-4856 MPN 50-3737-1Boom Ruddevator Weight
- 1560-00-723-0948 MPN 25-6075-506Aircraft Structural Plate
- 1560-00-724-3261 MPN 25-8449-4Aircraft Access Cover
- 1560-00-777-9258 MPN 39-9927-3Anti-icing Bracket
- 1560-00-778-6860 MPN 29-3088Ammunition Door Yoke
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-057-3062 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30ABP10-31A | The Boeing Company |