NSN 5305-01-057-3063
High Torque Screw
Between 3.422 inches and 3.454 inches fastener length, flat countersunk head style, between 1.162 inches and 1.281 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number BACB30ABP10-51A for national stock number 5305010573063.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-057-3063.
-
MPN or Model
BACB30ABP10-51A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.600 inches and 0.652 inches -
Fastener Length
Between 3.422 inches and 3.454 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.162 inches and 1.281 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.625 inches -
Grip Length
Between 2.802 inches and 2.822 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30ab manufacturers standard
More from these suppliers
- 1560-00-070-6756 MPN 114S3621-3Aircraft Access Cover
- 1560-00-073-1075 MPN 107S8492-1Do Fitting Assembly
- 1560-00-073-1158 MPN 107S8425-24Link Assembly
- 1560-00-073-4217 MPN 107C2553-9Tube Subassembly
- 5940-00-082-4664 MPN BACT42C6-2Terminal Board
- 1560-00-121-9709 MPN 35-27765-3Elevator Seal Assembly
- 1560-00-325-1358 MPN 5-66153-2003Aircraft Door
- 1560-00-335-6815 MPN 60-1507Forward Nacelle Pin
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-057-3063 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30ABP10-51A | The Boeing Company |