NSN 5305-01-057-3067
High Torque Screw
Between 2.937 inches and 2.969 inches fastener length, flat countersunk head style, between 0.929 inches and 1.024 inches head diameter, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number BACB30ABP8-43A for national stock number 5305010573067.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-057-3067.
-
MPN or Model
BACB30ABP8-43A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.489 inches and 0.541 inches -
Fastener Length
Between 2.937 inches and 2.969 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.929 inches and 1.024 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Grip Length
Between 2.428 inches and 2.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-072-2254 MPN 66-17355-2Fairing Receptacle
- 1560-00-083-7811 MPN 5-96735-3Aircraft Structural Panel
- 1560-00-136-1731 MPN 5-85654-28Aircraft Fairing
- 1560-00-195-2824 MPN 5-71789-80Vertical Tail Aft Tip Assembly
- 1560-00-427-9202 MPN 69-24380-1Switch Linkage Assembly
- 5905-00-484-4568 MPN BACRH14W13001FGFilm Fixed Resistor
- 1560-00-516-0659 MPN 65-13169-8Track Bracket Assembly
- 4920-00-602-5696 MPN F71279Aircraft Maintenance Drill Jig
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-057-3067 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30ABP8-43A | The Boeing Company |