NSN 5305-01-057-3756
High Torque Screw
Between 0.640 inches and 0.687 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number NAS333-5 for national stock number 5305010573756.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-057-3756.
-
MPN or Model
NAS333-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.380 inches and 0.447 inches -
Fastener Length
Between 0.640 inches and 0.687 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Single Shear Strength
2690 pounds per square inch -
Internal Drive Style
Hexagon -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Width Across Flats
0.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.517 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Thread Series Designator
Unjf -
Specification Data
80205-nas 333 professional/industrial association standard
More from these suppliers
- 5935-01-067-0916 MPN NAS1599REVDElectrical Plug Connector
- 5940-01-425-7412 MPN NAS1063A4-462Terminal Board Marker Strip
- 1680-01-571-7708 MPN 10367-A-1032-17Controller Handle
- 5305-00-052-7407 MPN MS24627-14Tapping Screw
- 5305-00-058-4010 MPN MS24694S118Machine Screw
- 5305-00-068-5287 MPN MS24693-C49Machine Screw
- 5305-00-104-5080 MPN NAS1352-7LE36PSocket Head Cap Screw
- 5305-00-144-0508 MPN NAS1121-6HClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-057-3756 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS333-5 | National Aerospace Standards |
Stock Check
- NE: 628
- NS: 73