NSN 5305-01-057-8142
High Torque Screw
Between 1.076 inches and 1.106 inches fastener length, pan no. 2 head style, offset cruciform (torque set) internal drive style, thread diameter: 0.250 inches.
Manufacturer part number NAS1578A4T11 for national stock number 5305010578142.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-057-8142.
-
MPN or Model
NAS1578A4T11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.076 inches and 1.106 inches -
Head Style
Pan no. 2 -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4140 -
Thread Series Designator
Unc
More from these suppliers
- 5305-00-019-9444 MPN MS16208-145Hexagon Head Cap Screw
- 5305-00-034-1382 MPN NAS1624E7Machine Screw
- 5305-00-045-3195 MPN NAS1505-24Machine Screw
- 5305-00-050-1077 MPN MS90725-118Hexagon Head Cap Screw
- 5305-00-051-2333 MPN NASM51958Machine Screw
- 5305-00-068-7053 MPN NASM35202-43Machine Screw
- 5305-00-143-1508 MPN NAS662C1-5Machine Screw
- 5305-00-151-9318 MPN NAS1218-08E38Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-057-8142 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A4T11 | National Aerospace Standards |