NSN 5305-01-057-8146
High Torque Screw
Between 1.160 inches and 1.190 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580A3T13 for national stock number 5305010578146.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-057-8146.
-
MPN or Model
NAS1580A3T13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.160 inches and 1.190 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 or steel comp 8735 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-01-608-8388 MPN NAS6212-33DElectrical Receptacle Connector
- 5305-00-008-2062 MPN NAS1509-21Close Tolerance Screw
- 5305-00-052-7407 MPN MS24627-14Tapping Screw
- 5305-00-057-2601 MPN MS51038-129Setscrew
- 5305-00-082-6738 MPN MS51959-112Machine Screw
- 5305-00-184-8297 MPN NAS1102-5-16Machine Screw
- 5305-00-211-8903 MPN NAS1506-40Close Tolerance Screw
- 5305-00-501-9783 MPN NAS1219-3E14Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-057-8146 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3T13 | National Aerospace Standards |