NSN 5305-01-057-9335
High Torque Screw
Between 0.826 inches and 0.856 inches fastener length, flat countersunk head style, between 0.464 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number LE111-0008-0407 for national stock number 5305010579335.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-057-9335.
-
MPN or Model
LE111-0008-0407
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.387 inches and 0.428 inches -
Fastener Length
Between 0.826 inches and 0.856 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 1560-00-125-3240 MPN 140-34311Aircraft Former
- 5975-00-328-7835 MPN 5C8-11Electrical Wire Clamp
- 1560-00-393-9910 MPN 170-44808Line Assembly
- 5930-01-161-9511 MPN LE452-0016-1001Sensitive Switch
- 1560-01-179-6689 MPN L1201023-021Aircraft Access Door
- 1560-01-193-8830 MPN LE261-0050-0004Engine Bleed Air Seal
- 1560-01-204-1604 MPN L3227345-062Special Purpose Thermal Insulation
- 1560-01-208-8374 MPN L3226922-003Cam Forward Nacelle
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-057-9335 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LE111-0008-0407 | Boeing Company, The |
E004-0407 | Huck Intl Inc |
NAS1580C4T7 | National Aerospace Standards |
NAS1580C4T7P | National Aerospace Standards |
10114929 | Nimikkeistokeskus Ncb Finland |