NSN 5305-01-058-0751
High Torque Screw
Between 1.285 inches and 1.315 inches fastener length, flat countersunk head style, between 0.605 inches and 0.674 inches head diameter, grip diameter: between 0.4360 inches and 0.4370 inches .
Manufacturer part number NAS1581F7T10 for national stock number 5305010580751.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-058-0751.
-
MPN or Model
NAS1581F7T10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.650 inches and 0.700 inches -
Fastener Length
Between 1.285 inches and 1.315 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.605 inches and 0.674 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-01-425-6511 MPN NAS1063A5-444Terminal Board Marker Strip
- 5940-01-425-6526 MPN NAS1063Terminal Board Marker Strip
- 5940-01-443-8936 MPN NAS1063A5-199HTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-013-7692 MPN NAS1405-14Machine Screw
- 5305-00-051-2334 MPN MS51958-108Machine Screw
- 5305-00-057-4593 MPN NAS1351C3-6Socket Head Cap Screw
- 5305-00-182-9381 MPN NAS1100E4-22Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-058-0751 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F7T10 | National Aerospace Standards |
NAS1581A7T10 | National Aerospace Standards |