NSN 5305-01-058-0753
High Torque Screw
Between 0.570 inches and 0.620 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number BACB30LH3U4 for national stock number 5305010580753.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-058-0753.
-
MPN or Model
BACB30LH3U4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.310 inches and 0.380 inches -
Fastener Length
Between 0.570 inches and 0.620 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
End Application
Joint stars target radar system; aircraft, stratolifter c-135; aircraft, awacs, e-3a -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
81205-bacb30lh manufacturers standard
More from these suppliers
- 1680-01-524-1134 MPN 100-191-6-6Materi Aircraft Pin
- 5305-00-127-7510 MPN HR112-5-11Close Tolerance Screw
- 5305-00-823-5806 MPN NAS1102-04-8Machine Screw
- 5305-01-004-9497 MPN AIC813-06R16Machine Screw
- 5305-01-101-0708 MPN AIC813-02R8Machine Screw
- 5305-01-198-8522 MPN C7984-3-14Close Tolerance Screw
- 5305-01-254-2565 MPN 3M963-4L8Close Tolerance Screw
- 5305-01-350-2246 MPN AIC1658-4-11AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-058-0753 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3U4 | The Boeing Company |
BACB30LH3U4 | Sps Technologies, Llc |
BACB30LH3U4 | Arconic Global Fasteners & Rings, |
BACB30LH3U4 | Federal Manufacturing Corporation |
BACB30LH3U4 | Sps Technologies, Llc |
BACB30LH3U4 | Arconic Global Fasteners & Rings, |
BACB30LH3U4 | Sps Technologies, Llc |
BACB30LH3U4 | Huck International, Inc. |
BACB30LH3U4 | Voi-shan/chatsworth |
BACB30LH3U4 | Huck Intl Inc |