NSN 5305-01-058-3308
Panel Screw
Between 0.593 inches and 0.625 inches fastener length, pan head style, between 0.205 inches and 0.219 inches head diameter, head height: between 0.070 inches and 0.080 inches .
Manufacturer part number 7528255P022A for national stock number 5305010583308.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-058-3308.
-
MPN or Model
7528255P022A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096660 - Screws NOI Silver Plated -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.136 inches and 0.176 inches -
Fastener Length
Between 0.593 inches and 0.625 inches -
Head Style
Pan -
Head Diameter
Between 0.205 inches and 0.219 inches -
Head Height
Between 0.070 inches and 0.080 inches -
First Diameter From Head
Between 0.071 inches and 0.081 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.417 inches and 0.489 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Externally Relieved Body Diameter Quantity
1 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 302 or steel comp 303 -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 4920-00-137-6917 MPN 7633595G1Heater Assembly Plate
- 5905-00-455-3673 MPN 7736734P29Inductive Wire Wound Fixed Resistor
- 5950-00-517-8565 MPN 7581500G0001Power Transformer
- 5950-00-556-2605 MPN 7434503G1Saturable Reactor
- 4920-00-756-4296 MPN 884C393G1Monitor Assembly
- 5945-00-948-1420 MPN 7736405P1Special Relay
- 5935-00-954-9159 MPN 882C396P34Electrical Receptacle Connector
- 5905-01-015-8013 MPN 885C999P1Inductive Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-058-3308 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7528255P022A | Lockheed Martin Corp |
7528255P22A | Lockheed Martin Corp |
7528255P22A | Lockheed Martin Corp |