NSN 5305-01-058-3922
High Torque Screw
Between 0.736 inches and 0.766 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1581F5T4 for national stock number 5305010583922.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-058-3922.
-
MPN or Model
NAS1581F5T4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 0.736 inches and 0.766 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 or steel comp 8735 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-01-439-8104 MPN NAS1388-5Conductor Splice
- 5940-01-437-8563 MPN NAS1063A2-107CXTerminal Board Marker Strip
- 5305-00-007-6173 MPN NAS1100C00-6Machine Screw
- 5305-00-053-5462 MPN NAS1402-48Machine Screw
- 5305-00-057-7183 MPN NAS1351-3-10Socket Head Cap Screw
- 5305-00-059-8249 MPN MS35214-24Machine Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-058-3922 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F5T4 | National Aerospace Standards |
NAS1581A5T4 | National Aerospace Standards |