NSN 5305-01-058-3923
High Torque Screw
Between 0.861 inches and 0.891 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1580A5T6 for national stock number 5305010583923.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-058-3923.
-
MPN or Model
NAS1580A5T6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 0.861 inches and 0.891 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5305-00-054-9241 MPN MS24694C100Machine Screw
- 5305-00-069-4947 MPN NAS2806-24Close Tolerance Screw
- 5305-00-127-7941 MPN NAS1624-4Machine Screw
- 5305-00-143-3200 MPN NAS1633-4DMachine Screw
- 5305-00-145-2206 MPN NAS334C14Close Tolerance Screw
- 5305-00-281-8874 MPN MILS7839Machine Screw
- 5305-00-345-2378 MPN NAS1190E04P5BSocket Head Cap Screw
- 5305-00-442-4040 MPN NAS1623E34Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-058-3923 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A5T6 | National Aerospace Standards |