NSN 5305-01-058-7065
High Torque Screw
Between 1.563 inches and 1.595 inches fastener length, flat countersunk head style, between 0.573 inches and 0.640 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number BACB30AB-P5-18A for national stock number 5305010587065.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-058-7065.
-
MPN or Model
BACB30AB-P5-18A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.480 inches -
Fastener Length
Between 1.563 inches and 1.595 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.640 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30ab manufacturers standard
More from these suppliers
- 1560-00-335-6803 MPN 6-60429Aileron Contr Swivel Joint Plate
- 5905-00-437-5319 MPN BACRH14W21001FGFilm Fixed Resistor
- 1680-00-545-5027 MPN 5-42270-5Indicator Panel
- 1560-00-586-8619 MPN 5-89351-45Wing Panel Assembly
- 1560-00-600-2604 MPN 5-86506-68Lower Wing Panel Assembly
- 1560-00-601-3229 MPN 6-50537-3Aircraft Access Cover
- 1680-00-654-5040 MPN 65-6241-41Seam Cap Strip
- 1560-00-766-6125 MPN 29-3090-502Electronic Access Latch Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-058-7065 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30AB-P5-18A | The Boeing Company |