NSN 5305-01-058-7069
High Torque Screw
Between 0.515 inches and 0.547 inches fastener length, flat countersunk head style, between 0.329 inches and 0.388 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number BACB30AB-P3-3A for national stock number 5305010587069.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-058-7069.
-
MPN or Model
BACB30AB-P3-3A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.317 inches and 0.369 inches -
Fastener Length
Between 0.515 inches and 0.547 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.329 inches and 0.388 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-011-0674 MPN 65-5345-16Aircraft Trim Tab
- 1560-00-073-1097 MPN 107S8509-13Drain Valve Retainer
- 1560-00-233-1116 MPN 50-6237-3042Elevator Balance Weight
- 5905-00-342-2203 MPN 29-48065-1Resistor Assembly
- 5940-00-504-4703 MPN BACT12AC4Lug Terminal
- 1560-00-560-1155 MPN 65-6391-14Aircraft Structural Component Support
- 4920-00-604-1789 MPN F71257-9Aircraft Maintenance Fixture
- 1560-00-607-2223 MPN 5-88720-3008Aircraft Structural Panel
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-058-7069 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30AB-P3-3A | The Boeing Company |