NSN 5305-01-058-7071
High Torque Screw
Between 3.546 inches and 3.578 inches fastener length, flat countersunk head style, between 1.162 inches and 1.281 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number BACB30AB-P10-53A for national stock number 5305010587071.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-058-7071.
-
MPN or Model
BACB30AB-P10-53A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.598 inches and 0.650 inches -
Fastener Length
Between 3.546 inches and 3.578 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.162 inches and 1.281 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.625 inches -
Grip Length
Between 2.928 inches and 2.948 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-073-4242 MPN A02E4045-1Heating Duct Assembly
- 5940-00-082-4662 MPN BACT42C24-1Terminal Board
- 5905-00-286-4794 MPN BACRH14U267R0BFFilm Fixed Resistor
- 1560-00-390-8175 MPN 66-10943-2Control Arm
- 1560-00-520-5602 MPN 5-85637Cowling
- 5935-00-548-0950 MPN BACC63R12S3SElectrical Receptacle Connector
- 1560-00-626-7721 MPN 6-54196-501Aircraft Structural Component Support
- 1560-00-631-9880 MPN 9-61122-34Aileron Balance Panel Flap Hinge
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-058-7071 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30AB-P10-53A | The Boeing Company |