NSN 5305-01-059-0214
High Torque Screw
Between 1.348 inches and 1.378 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1581C3T16P for national stock number 5305010590214.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-0214.
-
MPN or Model
NAS1581C3T16P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 1.348 inches and 1.378 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5935-01-597-0336 MPN E0762F17-08LSpec Backshell
- 1680-01-571-7708 MPN 10367-A-1032-17Controller Handle
- 5305-00-068-5412 MPN NAS1352C02H8Socket Head Cap Screw
- 5305-00-079-2587 MPN NAS1351C4-28Socket Head Cap Screw
- 5305-00-126-6154 MPN NAS1623C29Machine Screw
- 5305-00-145-1041 MPN MS24693C340Machine Screw
- 5305-00-204-5062 MPN NAS1081C8D24Setscrew
- 5305-00-211-9041 MPN NAS1218-5-31Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-0214 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3T16P | National Aerospace Standards |