NSN 5305-01-059-0218
High Torque Screw
Between 1.390 inches and 1.422 inches fastener length, flat countersunk head style, between 0.693 inches and 0.768 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number BACB30AB-P6-17A for national stock number 5305010590218.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-0218.
-
MPN or Model
BACB30AB-P6-17A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.442 inches and 0.494 inches -
Fastener Length
Between 1.390 inches and 1.422 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.693 inches and 0.768 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30ab manufacturers standard
More from these suppliers
- 1560-00-072-8953 MPN 69-27405-1Flanged Fitting Adapter
- 1560-00-073-6957 MPN A02D4403-1Transmission Bearing Jet
- 1560-00-076-2492 MPN 50-1575-8Nacelle Drum Assembly
- 1560-00-076-9657 MPN 66-11795-3Thrust Reverser Switch Striker
- 5935-00-308-7768 MPN BACC45AC14-5SElectrical Receptacle Connector
- 1680-00-453-4927 MPN 65-35509-3Engine Wire Bundle
- 4820-00-529-5496 MPN 313690-1Safety Relief Valve
- 1560-00-602-3502 MPN 114S3812-13Fuselage To Ramp Hinge Fitting
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-0218 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30AB-P6-17A | The Boeing Company |