NSN 5305-01-059-0219
High Torque Screw
Between 2.015 inches and 2.047 inches fastener length, flat countersunk head style, between 0.693 inches and 0.768 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number BACB30AB-P6-27A for national stock number 5305010590219.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-0219.
-
MPN or Model
BACB30AB-P6-27A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.442 inches and 0.494 inches -
Fastener Length
Between 2.015 inches and 2.047 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.693 inches and 0.768 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30ab manufacturers standard
More from these suppliers
- 5930-00-004-0214 MPN BACS30T4-2SPush Switch
- 1560-00-017-7925 MPN 1-75016-502Aircraft Stiffener Rib
- 5940-00-082-4662 MPN BACT42C4-4Terminal Board
- 1560-00-210-9368 MPN 80292-15Reinforcement Plate
- 1560-00-214-8503 MPN 6-53131-2Aircraft Structural Plate
- 4920-00-270-0701 MPN F80080-56Vent Cover Assembly
- 1560-00-306-9894 MPN 9-60015-1Spoiler Arm Boot Assembly
- 4920-00-409-7686 MPN T65-73701-34Aircraft Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-0219 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30AB-P6-27A | The Boeing Company |