NSN 5305-01-059-0224
High Torque Screw
Between 3.312 inches and 3.344 inches fastener length, flat countersunk head style, between 0.929 inches and 1.024 inches head diameter, grip diameter: between 0.4982 inches and 0.4991 inches .
Manufacturer part number BACB30AB-P8-49A for national stock number 5305010590224.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-0224.
-
MPN or Model
BACB30AB-P8-49A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.490 inches and 0.542 inches -
Fastener Length
Between 3.312 inches and 3.344 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.929 inches and 1.024 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Grip Length
Between 2.802 inches and 2.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
81205-bacb30ab manufacturers standard
More from these suppliers
- 1560-00-327-0747 MPN 9-62570-4Outboard Cove Track
- 1560-00-335-8310 MPN 90-1417-1Aircraft Access Cover
- 1560-00-455-3842 MPN 65-11868Thrust Reverser Drum
- 5905-00-457-4802 MPN BACRH14U806R0BFFilm Fixed Resistor
- 1560-00-588-2078 MPN 29-2739-2Inflight Refueling Bracket
- 1560-00-622-7472 MPN 29-2468-800Current Transformer Box Bracket
- 1560-00-657-7253 MPN 26-4402Door Mechanism Link
- 1560-00-657-7263 MPN 25-6582-502Different Drum Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-0224 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30AB-P8-49A | The Boeing Company |