NSN 5305-01-059-1093
High Torque Screw
Between 0.973 inches and 1.003 inches fastener length, pan no. 2 head style, between 0.360 inches and 0.374 inches head diameter, head height: between 0.115 inches and 0.125 inches .
Manufacturer part number NAS1578C3T10 for national stock number 5305010591093.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-1093.
-
MPN or Model
NAS1578C3T10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.973 inches and 1.003 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches top of head -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5940-01-384-5279 MPN NAS1063F1-1Terminal Board Marker Strip
- 5305-00-007-9892 MPN NAS1102C04-12Machine Screw
- 5305-00-042-9477 MPN MS90725-91Hexagon Head Cap Screw
- 5305-00-043-2681 MPN MS24694S96Machine Screw
- 5305-00-058-9367 MPN MS51977-29Setscrew
- 5305-00-069-4945 MPN NAS2806-19Close Tolerance Screw
- 5305-00-145-0831 MPN NAS1635-08-46Machine Screw
- 5305-00-177-5575 MPN MS51975-46Shoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-1093 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C3T10 | National Aerospace Standards |