NSN 5305-01-059-1951
High Torque Screw
Between 2.937 inches and 2.984 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number NAS336CP27 for national stock number 5305010591951.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-1951.
-
MPN or Model
NAS336CP27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 2.694 inches and 2.824 inches -
Fastener Length
Between 2.937 inches and 2.984 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
10500 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 2.302 inches and 2.322 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.740 inches first hole and 2.760 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 or steel comp 8735 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 1560-01-423-0215 MPN NAS6706D19Aircraft Structural Component Support
- 5940-01-384-5279 MPN NAS1063F1-1Terminal Board Marker Strip
- 5305-00-008-5886 MPN NAS1102E06-8PMachine Screw
- 5305-00-147-8055 MPN NAS662C2LER15Socket Head Cap Screw
- 5305-00-151-5702 MPN NAS1352-08LN32PSocket Head Cap Screw
- 5305-00-174-1200 MPN NAS335PA15Machine Screw
- 5305-00-207-4989 MPN MS24677-17Socket Head Cap Screw
- 5305-00-226-7610 MPN MS16995-102Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-1951 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CP27 | National Aerospace Standards |