NSN 5305-01-059-1955
High Torque Screw
Between 2.330 inches and 2.360 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30LU3-32 for national stock number 5305010591955.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-1955.
-
MPN or Model
BACB30LU3-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 2.330 inches and 2.360 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-484-1957 MPN LS15265V4-26Close Tolerance Screw
- 5305-00-508-3049 MPN LS15265V4-6Close Tolerance Screw
- 5305-01-413-7379 MPN VCL0009-4-25Close Tolerance Screw
- 5305-01-447-6386 MPN 3M1170D3-10AClose Tolerance Screw
- 5305-01-513-9648 MPN ST3M557-5-7Close Tolerance Screw
- 5306-00-150-3376 MPN MS21250-06068Shear Bolt
- 5306-00-464-8627 MPN J303P11BShoulder Bolt
- 5306-00-815-4973 MPN 3M33-3-33AClose Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-1955 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU3-32 | Huck International, Inc. |
BACB30LU3-32 | Valley-todeco, Inc. |
BACB30LU3-32 | Federal Manufacturing Corporation |
BACB30LU3-32 | Sps Technologies, Llc |
BACB30LU3-32 | Arconic Global Fasteners & Rings, |
BACB30LU3-32 | Sps Technologies, Llc |
BACB30LU3-32 | Alcoa Global Fasteners, Inc. |
BACB30LU3-32 | The Boeing Company |
BACB30LU3-32 | Huck Intl Inc |
BACB30LU3-32 | Sps Technologies, Llc |
BACB30LU3-32 | Sps Technologies, Llc |
BACB30LU3-32 | Sonic Industries Inc. |