NSN 5305-01-059-3589
High Torque Screw
Between 0.562 inches and 0.592 inches fastener length, flat countersunk head style, between 0.455 inches and 0.510 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number BACB30LH4U3 for national stock number 5305010593589.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-3589.
-
MPN or Model
BACB30LH4U3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.364 inches and 0.414 inches -
Fastener Length
Between 0.562 inches and 0.592 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.455 inches and 0.510 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
81205-bacb30lh manufacturers standard
More from these suppliers
- 5305-01-015-3365 MPN ST3M454-3L9Close Tolerance Screw
- 5305-01-435-5757 MPN BACB30LU8-27Close Tolerance Screw
- 5305-01-435-5847 MPN BACB30LU8-37Close Tolerance Screw
- 5305-01-513-9648 MPN ST3M557-5-7Close Tolerance Screw
- 5306-00-425-2657 MPN VAL23602-4DS028Close Tolerance Bolt
- 5306-00-913-2430 MPN MS21250-04012Shear Bolt
- 5306-01-104-4832 MPN BACB30MT6T12Shear Bolt
- 5306-01-123-9781 MPN VEP220221-8F15Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-3589 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH4U3 | Valley-todeco, Inc. |
BACB30LH4U3 | Sps Technologies, Llc |
BACB30LH4U3 | Federal Manufacturing Corporation |
BACB30LH4U3 | Sps Technologies, Llc |
BACB30LH4U3 | Arconic Global Fasteners & Rings, |
BACB30LH4U3 | Sps Technologies, Llc |
BACB30LH4U3 | Arconic Global Fasteners & Rings, |
BACB30LH4U3 | The Boeing Company |
BACB30LH4U3 | Voi-shan/chatsworth |
BACB30LH4U3 | Huck Intl Inc |
BACB30LH4U3 | Huck International, Inc. |