NSN 5305-01-059-3593
High Torque Screw
Between 4.438 inches and 4.468 inches fastener length, flat countersunk head style, 1.201 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number NAS590-56 for national stock number 5305010593593.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-3593.
-
MPN or Model
NAS590-56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 4.047 inches and 4.188 inches -
Fastener Length
Between 4.438 inches and 4.468 inches -
Head Style
Flat countersunk -
Head Diameter
1.201 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.625 inches -
Grip Length
Between 3.490 inches and 3.510 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 or steel comp 8735 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas590 professional/industrial association standard
More from these suppliers
- 5940-01-452-6925 MPN NAS1063A11-172GTerminal Board Marker Strip
- 5305-00-007-9879 MPN NAS1100C04-4PMachine Screw
- 5305-00-052-6681 MPN MS35198-29Machine Screw
- 5305-00-058-4025 MPN MS24694S127Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
- 5305-00-106-6241 MPN MS24671-40Socket Head Cap Screw
- 5305-00-144-3838 MPN MILS7839Machine Screw
- 5305-00-147-3241 MPN MS51861-40CTapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-3593 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS590-56 | National Aerospace Standards |