NSN 5305-01-059-5916
High Torque Screw
Between 0.597 inches and 0.627 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number BACB30FB4-3 for national stock number 5305010595916.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-5916.
-
MPN or Model
BACB30FB4-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 0.597 inches and 0.627 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-815-3984 MPN HT1029A3-5Close Tolerance Screw
- 5305-01-027-4663 MPN HT4020-5-7AClose Tolerance Screw
- 5305-01-142-7198 MPN HT4049-4-9YShoulder Screw
- 5305-01-184-3777 MPN BACB30LU8-21YShoulder Screw
- 5305-01-198-8555 MPN SC1779-5-20Close Tolerance Screw
- 5305-01-246-3871 MPN SC1779-4-12Close Tolerance Screw
- 5305-01-288-7851 MPN VT1696-7-27Close Tolerance Screw
- 5305-01-435-6493 MPN BACB30LU9-25Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-5916 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30FB4-3 | Arconic Global Fasteners & Rings, |
BACB30FB4-3 | Huck International, Inc. |
BACB30FB4-3 | Arconic Global Fasteners & Rings, |
BACB30FB4-3 | Sps Technologies, Llc |
BACB30FB4-3 | Hi-shear Corporation |
BACB30FB4-3 | Lisi Aerospace Canada Corp |
BACB30FB4-3 | The Boeing Company |