NSN 5305-01-059-7422
Bolt Stove
Between 0.776 inches and 0.786 inches fastener length, flat countersunk head style, between 0.147 inches and 0.172 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number 407071-1 for national stock number 5305010597422.
Datasheet
-
Product description
Machine Screw NSN 5305-01-059-7422.
-
MPN or Model
407071-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.689 inches and 0.735 inches -
Fastener Length
Between 0.776 inches and 0.786 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.147 inches and 0.172 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Countersink Angle
82.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Screw Material
Steel comp 301 or steel comp 302 or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 323 or steel comp 324 or steel comp 347 or steel comp 348 or steel comp 385 -
Screw Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-173-4376 MPN 395933-1Power Transformer
- 5935-00-483-2141 MPN 363801-2Electrical Plug Connector
- 5950-00-645-3616 MPN 100847-3Radio Frequency Coil
- 5905-00-646-5785 MPN 108699-6Film Fixed Resistor
- 5905-01-167-6968 MPN 146116-59Film Fixed Resistor
- 5935-01-276-2327 MPN 441185-37Receptacle Dummy Connector
- 1560-01-287-5468 MPN 298B36Aircraft Structural Plate
- 5935-01-480-5415 MPN 468964-1Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-059-7422 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
407071-1 | Edo Llc |
407071-1 | Edo Llc |