NSN 5305-01-060-9602
High Torque Screw
Between 2.439 inches and 2.469 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number AIC984-6-32 for national stock number 5305010609602.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-060-9602.
-
MPN or Model
AIC984-6-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.479 inches -
Fastener Length
Between 2.439 inches and 2.469 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-068-5371 MPN C082-5-18Close Tolerance Screw
- 5305-00-316-7737 MPN AIC812-06-5Machine Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-01-016-1549 MPN AIC811-00-7Machine Screw
- 5305-01-123-8456 MPN AIC812-08-9Machine Screw
- 5305-01-284-2488 MPN BACB30MS8S12Close Tolerance Screw
- 5305-01-303-5636 MPN AIC939-3-14Close Tolerance Screw
- 5305-01-476-0845 MPN BACS12CK06D14Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-060-9602 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC984-6-32 | Sps Technologies, Llc |
PBF1165-6-32 | Sps Technologies, Llc |
121557-6-A32P | Sps Technologies, Llc |
VT1693F6-32 | Alcoa Global Fasteners, Inc. |
C7984-6-32 | Lockheed Martin Corporation |
AIC984-6-32P | Sps Technologies, Llc |